How to speed up raid1 resync ?

Just echo large numbers into both min and max resync speed proc entries:

/proc/sys/dev/raid/spped_limit_max and speed_limit_min

e.g. as root do:

 echo 200000 > /proc/sys/dev/raid/speed_limit_max
 echo 200000 > /proc/sys/dev/raid/speed_limit_min

And watch the speed fly up till it maxes out your hardware. (-:

The above will set both speeds to 200MiB/s which ought to be more than

your devices can do...





from linux kernel mailing list

written by Anton Altaparmakov

---

rate this article:
current rating: average rating: 1.3 (130 votes) (1=very good 6=terrible)
Your rating:

Very good (1) Good (2) ok (3) average (4) bad (5) terrible (6)

back