You are here: manpages
FTW
Section: Linux Programmer's Manual (3) Updated: 2010-09-20 Index
Return to Main Contents
NAME
ftw, nftw - file tree walk
SYNOPSIS
#include <ftw.h>
int ftw(const char *dirpath,
int (*fn) (const char *fpath, const struct stat *sb,
int typeflag),
int nopenfd);
#define _XOPEN_SOURCE 500
#include <ftw.h>
int nftw(const char *dirpath,
int (*fn) (const char *fpath, const struct stat *sb,
int typeflag, struct FTW *ftwbuf),
int nopenfd, int flags);
DESCRIPTION
ftw()
walks through the directory tree that is
located under the directory dirpath,
and calls fn() once for each entry in the tree.
By default, directories are handled before the files and
subdirectories they contain (preorder traversal).
To avoid using up all of the calling process's file descriptors,
nopenfd specifies the maximum number of directories that
ftw()
will hold open simultaneously.
When
the search depth exceeds this,
ftw()
will become slower because
directories have to be closed and reopened.
ftw()
uses at most
one file descriptor for each level in the directory tree.
For each entry found in the tree,
ftw()
calls
fn() with three arguments:
fpath,
sb,
and
typeflag.
fpath
is the pathname of the entry,
and is expressed either as a pathname relative to the calling process's
current working directory at the time of the call to
ftw(),
if
dirpath
was expressed as a relative pathname,
or as an absolute pathname, if
dirpath
was expressed as an absolute pathname.
sb
is a pointer to the
stat
structure returned by a call to
stat(2)
for
fpath.
typeflag
is an integer that has one of the following values:
- FTW_F
-
fpath
is a regular file.
- FTW_D
-
fpath
is a directory.
- FTW_DNR
-
fpath
is a directory which can't be read.
- FTW_NS
-
The
stat(2)
call failed on
fpath,
which is not a symbolic link.
If
fpath
is a symbolic link and
stat(2)
failed, POSIX.1-2001 states
that it is undefined whether FTW_NS or FTW_SL (see below)
is passed in
typeflag.
To stop the tree walk, fn() returns a nonzero value; this
value will become the return value of
ftw().
As long as fn() returns 0,
ftw()
will continue either until it has traversed the entire tree,
in which case it will return zero,
or until it encounters an error (such as a
malloc(3)
failure), in which case it will return -1.
Because
ftw()
uses dynamic data structures, the only safe way to
exit out of a tree walk is to return a nonzero value from fn().
To allow a signal to terminate the walk without causing a memory leak,
have the handler set a global flag that is checked by fn().
Don't use
longjmp(3)
unless the program is going to terminate.
nftw()
The function
nftw()
is the same as
ftw(),
except that it has one additional argument, flags,
and calls fn() with one more argument, ftwbuf.
This flags argument is formed by ORing zero or more of the
following flags:
- FTW_ACTIONRETVAL (since glibc 2.3.3)
-
If this glibc-specific flag is set, then
nftw()
handles the return value from
fn()
differently.
fn()
should return one of the following values:
-
- FTW_CONTINUE
-
Instructs
nftw()
to continue normally.
- FTW_SKIP_SIBLINGS
-
If fn() returns this value, then
siblings of the current entry will be skipped,
and processing continues in the parent.
- FTW_SKIP_SUBTREE
-
If fn() is called with an entry that is a directory
(typeflag is FTW_D), this return
value will prevent objects within that directory from being passed as
arguments to fn().
nftw()
continues processing with the next sibling of the directory.
- FTW_STOP
-
Causes
nftw()
to return immediately with the return value
FTW_STOP.
Other return values could be associated with new actions in the future;
fn() should not return values other than those listed above.
The feature test macro
_GNU_SOURCE
must be defined
(before including
any
header files)
in order to
obtain the definition of FTW_ACTIONRETVAL from <ftw.h>.
- FTW_CHDIR
-
If set, do a
chdir(2)
to each directory before handling its contents.
This is useful if the program needs to perform some action
in the directory in which fpath resides.
- FTW_DEPTH
-
If set, do a post-order traversal, that is, call fn() for
the directory itself after handling the contents of the directory
and its subdirectories.
(By default, each directory is handled before its contents.)
- FTW_MOUNT
-
If set, stay within the same file system
(i.e., do not cross mount points).
- FTW_PHYS
-
If set, do not follow symbolic links.
(This is what you want.)
If not set, symbolic links are followed, but no file is reported twice.
If FTW_PHYS is not set, but FTW_DEPTH is set,
then the function
fn()
is never called for a directory that would be a descendant of itself.
For each entry in the directory tree,
nftw()
calls
fn()
with four arguments.
fpath
and
sb
are as for
ftw().
typeflag
may receive any of the same values as with
ftw(),
or any of the following values:
- FTW_DP
-
fpath
is a directory, and FTW_DEPTH was specified in flags.
All of the files
and subdirectories within fpath have been processed.
- FTW_SL
-
fpath
is a symbolic link, and FTW_PHYS was set in flags.
- FTW_SLN
-
fpath
is a symbolic link pointing to a nonexistent file.
(This occurs only if FTW_PHYS is not set.)
The fourth argument that
nftw()
supplies when calling
fn()
is a structure of type FTW:
struct FTW {
int base;
int level;
};
base
is the offset of the filename (i.e., basename component)
in the pathname given in
fpath.
level
is the depth of
fpath
in the directory tree, relative to the root of the tree
(dirpath,
which has depth 0).
RETURN VALUE
These functions return 0 on success, and -1 if an error occurs.
If fn() returns nonzero,
then the tree walk is terminated and the value returned by fn()
is returned as the result of
ftw()
or
nftw().
If
nftw()
is called with the FTW_ACTIONRETVAL flag,
then the only nonzero value that should be used by fn()
to terminate the tree walk is FTW_STOP,
and that value is returned as the result of
nftw().
CONFORMING TO
POSIX.1-2001, SVr4, SUSv1.
POSIX.1-2008 marks
ftw()
as obsolete.
NOTES
POSIX.1-2001 note that the results are unspecified if
fn
does not preserve the current working directory.
The function
nftw()
and the use of FTW_SL with
ftw()
were introduced in SUSv1.
On some systems
ftw()
will never use FTW_SL, on other systems FTW_SL occurs only
for symbolic links that do not point to an existing file,
and again on other systems
ftw()
will use FTW_SL for each symbolic link.
For predictable control, use
nftw().
Under Linux, libc4 and libc5 and glibc 2.0.6 will
use FTW_F for all objects (files, symbolic links, FIFOs, etc.)
that can be stat'ed but are not a directory.
The function
nftw()
is available since glibc 2.1.
FTW_ACTIONRETVAL is glibc-specific.
EXAMPLE
The following program traverses the directory tree under the path named
in its first command-line argument, or under the current directory
if no argument is supplied.
It displays various information about each file.
The second command-line argument can be used to specify characters that
control the value assigned to the flags
argument when calling
nftw().
#define _XOPEN_SOURCE 500
#include <ftw.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <stdint.h>
static int
display_info(const char *fpath, const struct stat *sb,
int tflag, struct FTW *ftwbuf)
{
printf("%-3s %2d %7jd %-40s %d %s\n",
(tflag == FTW_D) ? "d" : (tflag == FTW_DNR) ? "dnr" :
(tflag == FTW_DP) ? "dp" : (tflag == FTW_F) ? "f" :
(tflag == FTW_NS) ? "ns" : (tflag == FTW_SL) ? "sl" :
(tflag == FTW_SLN) ? "sln" : "???",
ftwbuf->level, (intmax_t) sb->st_size,
fpath, ftwbuf->base, fpath + ftwbuf->base);
return 0; /* To tell nftw() to continue */
}
int
main(int argc, char *argv[])
{
int flags = 0;
if (argc > 2 && strchr(argv[2], aqdaq) != NULL)
flags |= FTW_DEPTH;
if (argc > 2 && strchr(argv[2], aqpaq) != NULL)
flags |= FTW_PHYS;
if (nftw((argc < 2) ? "." : argv[1], display_info, 20, flags)
== -1) {
perror("nftw");
exit(EXIT_FAILURE);
}
exit(EXIT_SUCCESS);
}
SEE ALSO
stat(2),
fts(3),
readdir(3),
feature_test_macros(7)
COLOPHON
This page is part of release 3.27 of the Linux
man-pages
project.
A description of the project,
and information about reporting bugs,
can be found at
http://www.kernel.org/doc/man-pages/.
Index
- NAME
-
- SYNOPSIS
-
- DESCRIPTION
-
- nftw()
-
- RETURN VALUE
-
- CONFORMING TO
-
- NOTES
-
- EXAMPLE
-
- SEE ALSO
-
- COLOPHON
-
Please read "Why adblockers are badwww.cars2fast4u.de
|